ELECTROMAN™ / FLOWMAN™: High speed hot foil stamping systems for easy integration

FLOWMAN™

The rotary foil stamping systems ELECTROMAN™ and FLOWMAN™ are a set of either electrically or oil heated hot foil stamping mandrel and impression cylinder. ELECTROMAN™ is operated electrically and therefore needs no external heating equipment. The systems concept is designed for basic stamping requirements. The oil heated FLOWMAN™ works with an external oil heating unit which achieves a higher mandrel temperature, allowing the stamping of more demanding hot foil designs.


Remark to ELECTROMAN™ Sales:

ELECTROMAN™ is sold via OEM's, please contact us for OEM list.

 

Not sure if ELECTROMAN™ or FLOWMAN™ fits better to your application?

Fast running due to high preload

The impression cylinder and the tool mandrel are equipped with bearers. The high preload between the cylinders is induced directly to the bearers, granting smooth and fast running.


Sophisticated adjustments

The stamping pressure is set by adjusting the gap between impression- and tool cylinder independently from the preload. The tool cylinder is laterally movable to register perfectly to the preprint.

 

Clean handling

For an extremely fast job change, an externally pre-heated mandrel is exchanged with the last job’s mandrel. Changing the tool is very simple. Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.  

Technical Data

 

ELECTROMAN™

330 410
Foil width / stamping width, max. 350 / 330 mm 430 / 410 mm
Max. temperature 200° C
Mandrel types (Diameter / format length) D85 (12" .. 18 1/8") D135 (18 1/4" .. 24")

 

FLOWMAN™

330 410 510
Foil width / stamping width, max. 350 / 330 mm 430 / 410 mm 530 / 510 mm
Max. temperature 250° C
Mandrel types (Diameter / format length) D85 (12" .. 18 1/8") D135 (18 1/4" .. 24")z = 192


 

Are you looking for further information?